卖:
- uhmwpe pipe/ rod/ sheet
Advantage :
1. The highest abrasion resistance of any thermoplastic polymer
2. Outstanding impact strength even at very low temperatures
3. An excellent sliding material due to the low coefficient of friction
4. Self-lubricating (non-caking and sticking)
5. Good chemical and stress cracking resistance
6. Easily machined
(1)
uhmwpe sheet
Size:Width X Length (mm)
600 x 600, 900 x 1200, 2000 x 1000,
2100 x 1200, 4000 x 1000
Thickness (mm) :6.5-150
Other sizes are available upon request.
2
UHMWPE Rod
Specification:
Size :15, 20, 30, 40
Out Of Roundness:3
Diameter Tolerance: +-1.5
Length:1000mm
Size :50, 70,
Out Of Roundness:5
Diameter Tolerance: +-2.5
Length:1000mm
Size :100, 140, 160, 180, 200.
Out Of Roundness:6
Diameter Tolerance: +-3
Length:1000mm
General Applications:
1. Food processing bearings, guide rails, rollers.
2. Chain guides, chain tensioners , agricultural diverters.
3. Wastewater treatment scraper blades
4. Wear strips
5. Wear plates
6. Bearings
(3)
UHMWPE pipe(tube)
Specification
25, 32, 40, 50, 63, 75, 90, 110, 125, 140,
160, 180, 200, 225, 2 50, 280, 315, 355, 400, 450, 500, 630.
General Applications:
In the transportation of particle, powder, corrosive liquid and gas, it's the premier selection.
- carbon fiber(graphite) felt
It is based on PAN/ rayon fiber, the manufacturing process is pre-oxide, needle-punched, Carbonization, graphitization. It's an excellent material used in high- temperature thermal insulation.
(1) PAN carbon fiber felt
Rayon carbon fiber felt
Area Density: 400~1350 g/ m2
Carbon Content: 90~95%
Tensile strength: Warp: 8~14, Weft: 10~ 16
Thermal conductivity:
- HVAC filter
(1) PP(Polypropylene)Fiber Filter Material,
Filter Efficiency: From 85% To 99.999%, (F5-H12)
Can be pleated, pleated width: 1", 2", 4"
It Can Be Used For pleated panel filters, Filter Bag, Mask, Respirator, auto parts, Medium And High Efficiency Filter. Acid And Alkali Resistant, Melting Point: 167-174 Centigrade.
(2) Synthetic Fiber Filter Material,
Filter Efficiency From 15% -90%(for 1 Micron), 35%-90% (For 2 Micron), 45%-95% (For 5 Micron).
Can Be Used For Plate Filter, Plate/ Spiral-Wound Filters, Sprial-Wound Filter. Oil Filtration, Dust Collector Bag.
Well Flame Retardant, Fire Protection Grade: U12. Washable.
Thickness: 3--20mm, Max Width: 2000mm,
(3) Composite Filter Material (pocket filters, bag filters ), Compounded By Polypropylene, Polyester And Spunbonded Fabric.
Filter Efficiency: 35%-95%(For 0.5 Micron), 60%-98%(For 1 Micron), 85%-99%(For 2 Micron).
Can Be Used In Bag And Plate Filters, Etc.
Initial resistance: 35-50 Pa, DHC: >100 g/ m
Max Width: 720mm.
F7 type:
Model: 595mm x 595mm x 600mm -8(pockets),
Test temperature: 15-25 centigrade. Humidity:
- Glass Fiber paper / tissue
Advantage :
High filter efficiency,
High DHC(dust-holding capacity) ,
High mechanical strength,
Stable physical and chemical properties ,
High temperature resistance ,
High flow rate and low air resistance.
Glass fiber tissue
Initial resistance(Pa) :from 50 to 100
Precision(m) :from 60 to 5
Filter efficiency(%) :from 85 to 99.9
USE
For making Panel air filter, pleat Air Filter, used for pre-filter and liquefaction, Gas oil separation, spray-paint workshop and compressor. Can be worked under 300 for long time, and no burning.
Composite glass fiber filter paper
Composed by super-fine glass fiber and synthetic fiber. Enhanced the mechanical strength, and prevent the chipping from super-fine glass fiber.
Precision(m) : from 1 to 30
Thickness (mm) : 0.40-0.5
Tensile strength (kg/ 15mm) : >2
Burst (Mpa) : >0.2
Width (mm) : 600, 1000
Use
For making Panel air filter, pleat Air Filter, used for Gas oil separation, Oil filter, spray-paint workshop and compressor.
- PP Sheet
PP Sheet have high strength, fine heat resisting quality and good anti-corrodibility. They are widely used in chemical industries, electronic industry and other industries.
PP Sheet :
Density: 0.93 g/ cm3
tensile strength(MD) :>=23 MPa
tensile strength (TD) :>=23 MPa
impact strength (MD) : >=10 KJ/ cm2
impact strength (TD) : >=10 KJ/ cm2
Heat Distortion Temp. : >=90
Low Temperature Brittleness:
|
|
